Technical
Specifications MX 2100
|
|
Inputs |
4 Microphone inputs; 3 external dynamic MIC and one internal condenser MIC.
One line input for cassete, DAT or digital recorder
|
|
MIC
input level |
From
-20 to -75 dBu.
Non clipping MIC preamplifier at any level |
|
Audio
output |
Balanced
audio output 0 dBu / 10 Kohms |
|
Hybrid
Outputs |
2
outputs with internal Hybrid. One for phone line (POT) and one for cellular
phone |
|
Headset
outputs |
3
outputs for headsets. Z= 8 to 600 ohms
With separate amplifier with level control |
|
Frequency
Response |
Flat
20-15.000 Hz plus an anti-pop filter with -6 dB @ 30 Hz and Low pass filter
-3 dB @ 12 Khz |
|
THD
Distortion |
Less than 0,4 % @ 1 Khz |
|
Noise |
70 dBA Signal/Noise ratio with -40 dBu MIC level |
|
Audio
Compressor |
16 dB action with 2 LED indication.
10 ms attack time and 200 ms recovery |
|
Fast
Limiter |
Peak
limiter after compressor stage to avoid digital saturation of cellular
phones. |
|
Electronic
Technology |
Full
use of advanced CMOS amplifiers with very low power consumption , for long
battery duration |
|
Cellular
connection |
Full wireless Bluetooth connection with 16 bits converter.
Red and Green indication of status
Backup of cellular link: RJ11
open cable to be connected to the Hands-free kit of the second cellular
phone.
|
|
DTMF
Dialer |
Internal
dialer for making call to Studios. The console is connected to RJ11 like
a regular phone set. |
|
Battery
charger |
The
console includes a multivoltage 90 V to 240 V, USB battery charger, with automatic
voltage selection |
|
Battery
duration |
MX
2100 works continously during 16 hours
Can be charged in one night
It uses a standard low cost 3,6 V battery used for wireless phone sets |
|
Dimensions
and Weight |
Dimensions:
121 mm x 129mm x 37 mm
Weight: 600 gr (0,6 Kg) |