Especificaciones
técnicas MX 2100
Diagrama en Bloques
|
| |
Inputs
|
4 Microphone
inputs; 3 external dynamic MIC and one internal condenser MIC.
One line input for cassete, DAT or digital recorder
|
| |
MIC
input level
|
From
-20 to -75 dBu.
Non clipping MIC preamplifier at any level |
| |
Audio
output
|
Balanced
audio output 0 dBu / 10 Kohms
|
| |
Hybrid
Outputs
|
2
outputs with internal Hybrid. One for phone line (POT) and one for cellular
phone
|
| |
Headset
outputs
|
3
outputs for headsets. Z= 8 to 600 ohms
With separate amplifier with level control
|
| |
Frequency
Response
|
Flat
20-15.000 Hz plus an anti-pop filter with -6 dB @ 30 Hz and Low pass filter
-3 dB @ 12 Khz
|
| |
THD
Distortion
|
Less than 0,4 % @ 1 Khz
|
| |
Noise
|
70 dBA Signal/Noise ratio with -40 dBu MIC level
|
| |
Audio
Compressor
|
16 dB action with 2 LED indication.
10 ms attack time and 200 ms recovery
|
| |
Fast
Limiter
|
Peak
limiter after compressor stage to avoid digital saturation of cellular
phones.
|
| |
Electronic
Technology
|
Full
use of advanced CMOS amplifiers with very low power consumption , for long
battery duration |
| |
Cellular
connection
|
Full wireless Bluetooth connection with 16 bits converter.
Red and Green indication of status
Backup of cellular link: RJ11
open cable to be connected to the Hands-free kit of the second cellular
phone.
|
| |
DTMF
Dialer
|
Internal
dialer for making call to Studios. The console is connected to RJ11 like
a regular phone set. |
| |
Battery
charger
|
The
console includes a multivoltage 90 V to 240 V, USB battery charger, with automatic
voltage selection |
| |
Battery
duration
|
MX
2100 works continously during 16 hours
Can be charged in one night
It uses a standard low cost 3,6 V battery used for wireless phone sets |
| |
Dimensions
and Weight
|
Dimensions:
121 mm x 129mm x 37 mm
Weight: 600 gr (0,6 Kg)
|