Solidyne - Digital Power

Audio Inputs	3 balanced MIC inputs (XLR) 3 balanced stereo Line inputs (DIN 5) 4 unbalanced stereo Line inputs (RCA) 2 Digital stereo Line inputs (USB)
Inputs Level & Impedance	Balanced MIC= -10 dBu/-75 dBu; 150/250 Ohms Balanced LINE = -20 dBu/+26 dBu; 600~ 10Kohms Unbalanced LINE = -15 dBu/+12 dBu; 600~ 10Kohms Digital: standard USB levels
Phantom Power	All the MIC inputs have 48 V phantom power supply, switchable ON / OFF
Analog Outputs	2 bus stereo outputs; PGM & REC, balanced + 4 dBm; Max Level +28dBu (10K), +20dBm (600 ohms) External Hybrid: unbalanced + 4 dBu
Digital Input / Output Level	It uses the K-12 recommendation for broadcating; Then, 0 VU is at -12 dB Full Scale level
ON-AIR Signal	ON-AIR signal output (turns on when MIC is open) 12 V CC @ 0,12 amp (two Solidyne On-Air lights)
Monitor & Hybrid Outputs	1 Stereo Studio, 1 v rms for active speakers, muted 1 Stereo Control, 1 v rms for active speakers, muted 1 Stereo Studio Headphones, with Distribution AMP up to 8 headphones, + 10 dBu 1 Stereo Control Headphones, + 10 dBu 1 External Hybrid send (MIX-Minus) +4 dBu / 10K
CUE Monitor	Internal CUE Monitor Amplifier; 250 mW
Headroom	24 dB @ LIN to PGM Ref + 4dBu/10 k
Start External Devices	From MIC-1 & MIC-2 From Line 5 & 6 Open collector +24V @ 0,1 A
Frequency response	20-20.000 Hz +/- 0.5 dB (LIN to PGM)
MIC Equalizer	Four Bands MIC EQ with In/Out switch; 80 Hz top flat curve, 160 Hz bell shaped, 4 kHz bell shaped, 8 kHz top flat Action + 15 dB / -15 dB
MIC Compressor	Low distortion MIC compressor with In/Out switch. 20 dB max compression. Attack time < 10 ms. Threshold = 0 VU Compression ratio: < 2 dB variation for 15 dB change MIC level
Noise	MIC input, EIN=-120 dBu/150 ohms LINE input, S/N > 70 dBA
Dynamic Range	From Line to PGM > 90 dBA (CD quality)
Crosstalk	PGM-REC > 65 dBA @ 1 kHz
Distortion	From LINE to PGM out < 0.03 % THD @30-15.000 Hz.
Phase	From Line to PGM, < 3º L&R @50-10.000 Hz
Stereo Tracking	Below 0.2 dB error L/R in fader range 0 to 40 dB
Telephone Hybrid Specs	3 x active Hybrid (2 land lines + Cellular Phone) It includes a mini-PBX with blue LED silent ringer, Line attention with free hands operation, and Line Transfer Frequency Response: 300 - 3.400 Hz Noise: > 60 dBA S/N Rejection: > 40 dB rejection Rejection adjust in front panel preset Preference atenuator: 12 dB local speaker interrupt priority Automatic On-Air logic: Audio & Logic are managed from a single 100mm slide fader that performs all the operations in error-free mode (CUE, private hands free Talk - Hold with Air return - Live On Air)
Telephone input lightning discharge safety	Telephone Hybrid inputs are transformer floating to meet the Public Telephone service isolation standards. They are protected with SIOV Varistors against soft lightning discharges.
Talkback Microphone	Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM type. Outputs to Phone Line Hybrid or Studio Speakers & Headphones.
VU-meters	4 electronic VU-meters por PGM & REC. Cuasi peak reading, with standard yellow VU scale. Microphone compressor indicator 0 - 15 dB
Power	Switching external power supply 90-240 V, 20VA [28V@0,57A]
Dimensions & Weight	550 x 350 (D) x 130 mm Shipment box: 600 x 500 x 180 mm Shipment weight: 7 Kg

Technical Specifications

D816 Digital & Analog console