SolidynePro SolidyneLider

 

Descripción General

Aplicaciones y modos de trabajo VIDEO demo de uso

Atenuadores Ceramicos de alta duracion - Video de 6'

Comparación con otras consolas

Presentación PowerPoint Consolas de Audio

Folleto color D816 en PDF con especificaciones técnicas

   Especificaciones Técnicas

Manual de usuario


           Imprimir

           Comienzo

D816 Digital

 

Untitled Document

Especificaciones Técnicas
Technical Specifications

D816 Digital & Analog console


Audio Inputs

3 balanced MIC inputs (XLR)
3 balanced stereo Line inputs (DIN 5)
4 unbalanced stereo Line inputs (RCA)
2 Digital stereo Line inputs (USB)


Inputs
Level & Impedance

Balanced MIC= -10 dBu/-75 dBu; 150/250 Ohms
Balanced LINE = -20 dBu/+26 dBu; 600~ 10Kohms
Unbalanced LINE = -15 dBu/+12 dBu; 600~ 10Kohms
Digital: standard USB levels

Phantom Power
All the MIC inputs have 48 V phantom power supply, switchable ON / OFF

Analog Outputs

2 bus stereo outputs; PGM & REC, balanced + 4 dBm;
Max Level +28dBu (10K), +20dBm (600 ohms)
External Hybrid: unbalanced + 4 dBu

Digital Input / Output Level
It uses the K-12 recommendation for broadcating; Then, 0 VU is at -12 dB Full Scale level

ON-AIR Signal

ON-AIR signal output (turns on when MIC is open)
12 V CC @ 0,12 amp (two Solidyne On-Air lights)


Monitor & Hybrid
Outputs

1 Stereo Studio, 1 v rms for active speakers, muted
1 Stereo Control, 1 v rms for active speakers, muted
1 Stereo Studio Headphones, with Distribution AMP up to 8 headphones, + 10 dBu
1 Stereo Control Headphones, + 10 dBu
1 External Hybrid send (MIX-Minus) +4 dBu / 10K

CUE Monitor

Internal CUE Monitor Amplifier; 250 mW

Headroom

24 dB @ LIN to PGM Ref + 4dBu/10 k

Start External Devices

From MIC-1 & MIC-2
From Line 5 & 6
Open collector +24V @ 0,1 A

Frequency response

20-20.000 Hz +/- 0.5 dB (LIN to PGM)


MIC Equalizer
Four Bands MIC EQ with In/Out switch; 80 Hz top flat curve, 160 Hz bell shaped, 4 kHz bell shaped, 8 kHz top flat
Action + 15 dB / -15 dB

MIC Compressor
Low distortion MIC compressor with In/Out switch. 20 dB max compression. Attack time < 10 ms. Threshold = 0 VU
Compression ratio: < 2 dB variation for 15 dB change MIC level

Noise

MIC input, EIN=-120 dBu/150 ohms
LINE input, S/N > 70 dBA

Dynamic Range

From Line to PGM > 90 dBA (CD quality)

Crosstalk

PGM-REC > 65 dBA @ 1 kHz

Distortion

From LINE to PGM out < 0.03 % THD @30-15.000 Hz.

Phase

From Line to PGM, < 3º L&R @50-10.000 Hz

Stereo Tracking

Below 0.2 dB error L/R in fader range 0 to 40 dB

 

 

Telephone Hybrid Specs

3 line active Hybrid (2 land lines + Cellular Phone)
It includes a mini-PBX with blue LED silent ringer, Line attention with free hands operation, and Line Transfer

Frequency Response: 300 - 3.400 Hz
Noise: > 60 dBA S/N
Rejection: > 40 dB rejection
Rejection adjust in front panel preset
Preference atenuator: 12 dB local speaker interrupt priority
Automatic On-Air logic: Audio & Logic are managed from a single 100mm slide fader that performs all the operations in error-free mode (CUE, private hands free Talk - Hold with
Air return - Live On Air)

Telephone input lightning discharge safety
Telephone Hybrid inputs are transformer floating to meet the Public Telephone service isolation standards. They are protected with SIOV Varistors against soft lightning discharges.

Talkback Microphone

Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM type. Outputs to Phone Line Hybrid or Studio Speakers & Headphones.


VU-meters

4 electronic VU-meters por PGM & REC. Cuasi peak reading, with standard yellow VU scale.
Microphone compressor indicator 0 - 15 dB

Power

Switching external power supply 90-240 V, 20VA [28V@0,57A]

Dimensions & Weight

550 x 350 (D) x 130 mm
Shipment box: 600 x 500 x 180 mm
Shipment weight: 7 Kg